产品概述 返回TOPMSL嘉泰姆
The CXLB7374 combine switch-mode battery charger and
a boost regulator with fixed 3MHz switching frequency,
which drives two integrated N-channel power MOSFETs.
In battery charging, the high-efficiency step-down DC/DC
converter is capable of delivering 1.5A output current over
a wide input voltage range from 4V to 6V for CXLB7374, the
step-down DC/DC converter is ideally suited for portable
electronic devices that are powered from 1-cell Li-ion
battery. The Charging parameters and operating modes
can be programmed through an I
2C interface. The
CXLB7374 has high accuracy regulation of input current,
charge current and charge voltage. It equipped with charge
termination, and charge status monitoring for battery
detection.
The CXLB7374charge the battery in three phases:
conditioning, constant current and constant voltage. The
CXLB7374features Dynamic Power Management (DPM)
mode to accomplish input power limiting. The input current
is limited to the value set by the I
2C host. This feature
reduces battery charge current when the input power limit
is reached to avoid overloading the AC adapter when supplying
the load and the battery charger simultaneously.
The charge termination is based on battery voltage, a
programmed minimum current level and charge current
termination bit set by the I
2C host.
If the battery voltage falls below an internal threshold, the
CXLB7374automatically restarts the charge cycle, and
when the input voltage falls below the battery voltage, it
will enter a low-quiescent current sleep mode. The
CXLB7374supports the thermal regulation and over temperature
protection to maintain the junction temperature
of 120
oC by reducing charge current.
The CXLB7374can operate as a boost regulator. To support
USB OTG device, CXLB7374can provide VBUS
(5.05V) by boosting the battery voltage.
The CXLB7374is available in1.7mmx2.1mm WLCSP-20
and TQFN4x4-20A packages.
产品特点 返回TOPMSL嘉泰姆
· Charge Faster Than Linear Charger MSL嘉泰姆
· 3MHz with 0% to 99.5% Duty Cycle Synchronous
Switch-Mode Charger with 1.5A Integrated NMOSFETs MSL嘉泰姆
· 4V-6V Input Operating Range MSL嘉泰姆
· 20V Absolute Maximum Input Voltage MSL嘉泰姆
· Safety
-Reverse leakage protection to prevent battery
drainage MSL嘉泰姆
-Thermal regulation and protection MSL嘉泰姆
-Input/output over-voltage protection MSL嘉泰姆
-Cycle-by-cycle current limit MSL嘉泰姆
· Accuracy MSL嘉泰姆
-+1% charge voltage regulation (0 to 85oC) MSL嘉泰姆
-+5% charge current regulation MSL嘉泰姆
-+5% input current regulation (100mA and
500mA) MSL嘉泰姆
· Built-In Input Current Sensing and Limiting MSL嘉泰姆
· Automatic Charging MSL嘉泰姆
· Programmable Through High-Speed I2C
Interface(3.4Mb/s) MSL嘉泰姆
-Input Current Limit MSL嘉泰姆
-Fast-Charge and Termination Current MSL嘉泰姆
-Charge Regulation Voltage MSL嘉泰姆
-Weak Battery Voltage Threshold MSL嘉泰姆
-VIN DPM Threshold MSL嘉泰姆
-Termination Enable/Disable MSL嘉泰姆
-OTG Enable/Disable MSL嘉泰姆
-Reset All Parameter Control MSL嘉泰姆
-Safety Timer with Reset Control MSL嘉泰姆
· 5V, 500mA Boost Mode for USB OTG for 2.5V to 4.5V Battery InputMSL嘉泰姆
· Available in 1.7mmx2.1mm WLCSP-20 and
TQFN4x4-20A PackagesMSL嘉泰姆
应用范围 返回TOPMSL嘉泰姆
· Cell Phones, Smart Phones and PDAs MSL嘉泰姆
· Tablet PC MSL嘉泰姆
· Portable Media Players, Handheld DeviceMSL嘉泰姆
技术规格书(产品PDF) 返回TOP MSL嘉泰姆
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持</span>!</span>
MSL嘉泰姆
发表评论