CXSD61054 fully in tegrated , high-efficiency 2.0A synchronous rectified step-down converter hi

目录EQ4嘉泰姆

1.产品概述                       2.产品特点EQ4嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 EQ4嘉泰姆
5.产品封装图                     6.电路原理图                   EQ4嘉泰姆
7.功能概述                        8.相关产品EQ4嘉泰姆

 EQ4嘉泰姆

一,产品概述(General Description)      EQ4嘉泰姆

     The CXSD61054 is a fully in tegrated , high-efficiency  2.0A  synchronous  rectified step-down  converter.  The CXSD61054 operates at high efficiencyEQ4嘉泰姆
over a wide output current load range.EQ4嘉泰姆

      This device offers two operation modes,PWM control and PFM ModeEQ4嘉泰姆
switching control, which allows a high efficiency over the wider range of theEQ4嘉泰姆
load.The  rber of readily available standard external components and isEQ4嘉泰姆
available in an 6-pin SOT23 ROHS compliant package.EQ4嘉泰姆

二.产品特点(Features)EQ4嘉泰姆

* High Efficiency: Up to 95%EQ4嘉泰姆
* 600KHz Frequency OperationEQ4嘉泰姆
* 2.0A Output CurrentEQ4嘉泰姆
* No Schottky Diode RequiredEQ4嘉泰姆
* 3.5V to 18V Input Voltage RangeEQ4嘉泰姆
* 0.6V ReferenceEQ4嘉泰姆
 Slope Compensated Current ModeEQ4嘉泰姆
 Control for Excellent Line and LoadEQ4嘉泰姆
 Transient ResponseEQ4嘉泰姆
* Integrated internal compensationEQ4嘉泰姆
* Stable with Low ESR Ceramic OutputEQ4嘉泰姆
   CapacitorsEQ4嘉泰姆
* Over Current Protection withEQ4嘉泰姆
    Hiccup-ModeEQ4嘉泰姆
* Input over voltage protection(OVP)EQ4嘉泰姆
*  Thermal ShutdownEQ4嘉泰姆
*  Inrush Current Limit and Soft StartEQ4嘉泰姆
*  Available in SOT23-6 PackageEQ4嘉泰姆
*  -40°C to +85°C Temperature RangeEQ4嘉泰姆
三,应用范围 (Applications)EQ4嘉泰姆

Distributed Power SystemsEQ4嘉泰姆
Digital Set Top BoxesEQ4嘉泰姆
Flat Panel Television and MonitorsEQ4嘉泰姆
Wireless and DSL ModemsEQ4嘉泰姆
Notebook ComputerEQ4嘉泰姆
四.技术规格书下载（产品PDF）EQ4嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！EQ4嘉泰姆

 EQ4嘉泰姆

五,产品封装图 (Package)EQ4嘉泰姆

EQ4嘉泰姆
六.电路原理图EQ4嘉泰姆

EQ4嘉泰姆
EQ4嘉泰姆
七,功能概述EQ4嘉泰姆

Internal Regulator EQ4嘉泰姆
The CXSD61054 is a current mode step down DC/DC converter that provides excellentEQ4嘉泰姆
transient response with no extra external compensation components. This device containsEQ4嘉泰姆
an internal, low resistance, high voltage power MOSFET, and operates at a high 600KEQ4嘉泰姆
operating frequency to ensure a compact, high efficiency design with excellent AC and DCEQ4嘉泰姆
performance.EQ4嘉泰姆

Error AmplifierEQ4嘉泰姆
The error amplifier compares the FB pin voltage with the internal FB reference (VFB) andEQ4嘉泰姆
outputs a current proportional to the difference between the two. This output current is thenEQ4嘉泰姆
used to charge or discharge the internal compensation network to form the COMP voltage,EQ4嘉泰姆
which is used to control the power MOSFET current. The optimized internal compensationEQ4嘉泰姆
network minimizes the external component counts and simplifies the control loop design. EQ4嘉泰姆
Internal Soft-StartEQ4嘉泰姆
The soft-start is implemented to prevent the converter output voltage from overshootingEQ4嘉泰姆
during startup. When the chip starts, the internal circuitry generates a soft-start voltage (SS)EQ4嘉泰姆
ramping up from 0V to 0.6V. When it is lower than the internal reference (REF), SSEQ4嘉泰姆
overrides REF so the error amplifier uses SS as the reference. When SS is higher thanEQ4嘉泰姆
REF, REF regains control. The SS time is internally fixed to 1 ms.EQ4嘉泰姆
Over-Current-Protection and HiccupEQ4嘉泰姆
The CXSD61054 has cycle-by-cycle over current limit when the inductor current peak valueEQ4嘉泰姆
exceeds the set current limit threshold. Meanwhile, output voltage starts to drop until FB isEQ4嘉泰姆
below the Under-Voltage (UV) threshold, typically 30% below the reference. Once a UV isEQ4嘉泰姆
triggered, the CXSD61054 enters hiccup mode to periodically restart the part. ThisEQ4嘉泰姆
protection mode is especially useful when the output is dead-short to ground. The averageEQ4嘉泰姆
short circuit current is greatly reduced to alleviate the thermal issue and to protect theEQ4嘉泰姆
regulator. The CXSD61054 exits the hiccup mode once the over current condition isEQ4嘉泰姆
removed. EQ4嘉泰姆
Startup and Shutdown EQ4嘉泰姆
If both VIN and EN are higher than their appropriate thresholds, the chip starts. TheEQ4嘉泰姆
reference block starts first, generating stable reference voltage and currents, and then theEQ4嘉泰姆
internal regulator is enabled. The regulator provides stable supply for the remainingEQ4嘉泰姆
八,相关芯片选择指南               更多同类产品......EQ4嘉泰姆