固定1.2兆赫振荡器频率同步整流器CXSU63139低ESR输出电容稳定电流模式升压调节器92%效率

目录Tcu嘉泰姆

1.产品概述                       2.产品特点Tcu嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 Tcu嘉泰姆
5.产品封装图                     6.电路原理图                   Tcu嘉泰姆
7.功能概述                        8.相关产品Tcu嘉泰姆

一,产品概述(General Description)         Tcu嘉泰姆

      The CXSU63139 is a synchronous rectifier, fixed switching frequency (1.2MHz typical), andTcu嘉泰姆
current-mode step-up regulator. The device allows use of small inductors and output capacitors for USB devices. The current-mode control scheme provides fast transient response and good output voltage accuracy.At light loads, the CXSU63139 will automatically enter in Pulse Frequency Modulation (PFM) operation to reduce the dominant switching losses. During PFM operation,the IC consumes very low quiescent current and maintains high efficiency over the complete load range.Tcu嘉泰姆
      The CXSU63139 also includes current-limit and over-temperature shutdown to prevent damageTcu嘉泰姆
in the event of an output overload.Tcu嘉泰姆
      The CXSU63139 is available in 4mmx4mm TQFN4x4-16 and DFN3x3-12 packages.Tcu嘉泰姆
二.产品特点(Features)Tcu嘉泰姆

1.)92% Effiicency Synchronous Boost Converter With 1000-mA Output Current FromTcu嘉泰姆
      1.8V InputTcu嘉泰姆
2.)Stable with Low ESR Output CapacitorsTcu嘉泰姆
3.)Fixed 1.2MHz Oscillator FrequencyTcu嘉泰姆
4.)Low EMI Converter (Integrated Anti-Ringing Function)Tcu嘉泰姆
5.)Low Battery OutputTcu嘉泰姆
6.)Integrated Power Save Mode Operation to Improve Light Load EfficiencyTcu嘉泰姆
7.)Load Disconnected During ShutdownTcu嘉泰姆
8.)Output Current-Limit ProtectionTcu嘉泰姆
9.)Over Temperature ProtectionTcu嘉泰姆
10.)Under Voltage ProtectionTcu嘉泰姆
11.)Enable/Shutdown FunctionTcu嘉泰姆
12.)Available in TQFN4x4-16 and DFN3x3-12 PackagesTcu嘉泰姆
13.)Lead Free and Green Devices Available (RoHS Compliant)Tcu嘉泰姆
三,应用范围 (Applications)Tcu嘉泰姆

Power BankTcu嘉泰姆
TabletTcu嘉泰姆
Portable EquimentTcu嘉泰姆
四.下载产品资料PDF文档 Tcu嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！Tcu嘉泰姆

 Tcu嘉泰姆

五,产品封装图 (Package)Tcu嘉泰姆

Tcu嘉泰姆

六.电路原理图Tcu嘉泰姆

Tcu嘉泰姆

七,功能概述Tcu嘉泰姆

Main Control LoopTcu嘉泰姆

The CXSU63139 is a constant frequency, synchronous rectifier, and current-mode switching regulator. Tcu嘉泰姆

In normal operation, the internal N-channel power MOSFET is turned on each cycle when the oscillatorTcu嘉泰姆

 sets an internal RS latch and turned off when an internal comparator (ICMP) resets the latch. The peakTcu嘉泰姆

 inductor current which ICMP resets the RS latch is controlled by the voltage on the COMP node, which Tcu嘉泰姆

is the output of the error amplifier (EAMP). An external resistive divider connected between VOUT and Tcu嘉泰姆

ground allows the EAMP to receive an output feedback voltage VFB at FB pin. When the load current Tcu嘉泰姆

increases, it causes a slightly decrease in VFB relative to the 0.5V reference, which in turn causes theTcu嘉泰姆

 COMP volt- age to increase until the average inductor current matches the new load current.Tcu嘉泰姆
 Start-upTcu嘉泰姆
A start-up oscillator circuit is integrated in the CXSU63139.When the device enables, the circuit pumpsTcu嘉泰姆

 the output voltage high. Once the output voltage reaches 1.6V (typ),the main DC-DC circuitry turns onTcu嘉泰姆

 and boosts the output voltage to the final regulation voltage. Tcu嘉泰姆
Automatic PFM/PWM mode SwitchTcu嘉泰姆
The CXSU63139 is a fixed frequency PWM peak current modulation control step-up converter. At lightTcu嘉泰姆

 loads, theCXSU63139 will automatically enter in pulse frequency modulation operation to reduce the Tcu嘉泰姆

dominant switching losses. In PFM operation, the inductor current may reach zero or reverse on eachTcu嘉泰姆

 pulse. A zero current comparator turns off the P-channel synchronous MOSFET, forcing DCM(DiscontinuousTcu嘉泰姆

 Current Mode) operation at light load.These controls get very low quiescent current, help to maintain Tcu嘉泰姆

high efficiency over the complete load range. Tcu嘉泰姆
Synchronous RectificationTcu嘉泰姆
The internal synchronous rectifier eliminates the need for an external Schottky diode, thus reducing costTcu嘉泰姆

 and board space. During the cycle off-time, the P-FET turns on and shunts the FET body diode. As a Tcu嘉泰姆

result, the syn-chronous rectifier significantly improves efficiency with-out the addition of an externalTcu嘉泰姆

 component. Conversion efficiency can be as high as 92%.Tcu嘉泰姆
Load DisconnectTcu嘉泰姆
Driving EN to ground places the CXSU63139 in shutdown mode. When in shutdown, the internal powerTcu嘉泰姆

 MOSFET turns off, all internal circuitry shuts down and the quies-cent supply current reduces to 1μATcu嘉泰姆

 maximum.A special circuit is applied to disconnect the load from the input during shutdown the Tcu嘉泰姆

converter. In conventional syn-chronous rectifier circuits, the back-gate diode of the high-side P-FET Tcu嘉泰姆

is forward biased in shutdown and allows current flowing from the battery to the output. However,thisTcu嘉泰姆

 device uses a special circuit, which takes the cath-ode of the back-gate diode of the high-side P-FETTcu嘉泰姆

 and disconnects it from the source when the regulator is shutdown. The benefit of this feature for Tcu嘉泰姆

the system de-sign engineer is that the battery is not depleted during shutdown of the converter.  Tcu嘉泰姆

No additional componentsmust be added to the design to make sure that the bat-tery is disconnectedTcu嘉泰姆

 from the output of the converter. Tcu嘉泰姆
Current-Limit ProtectionTcu嘉泰姆
The CXSU63139 monitors the inductor current, flowing through the N-FET, and  limits the current Tcu嘉泰姆

peak at current-limit level to prevent loads and the CXSU63139 from dam-ages during overloadTcu嘉泰姆

 conditions.Tcu嘉泰姆
Over-Temperature Protection (OTP)Tcu嘉泰姆
The over-temperature circuit limits the junction tempera-ture of the CXSU63139. When the junctionTcu嘉泰姆

 temperature ex-ceeds 150oC, a thermal sensor turns off the both N-FETand P-FET, allowing the Tcu嘉泰姆

devices to cool. The thermal sensor allows the converters to start a soft-start process and regulateTcu嘉泰姆

 the output voltage again after the junction temperature cools by 30oC. The OTP is designed with Tcu嘉泰姆

a 30oC hysteresis to lower the average Junction Tempera-ture (TJ) during continuous thermal overload conditions,increasing the lifetime of the device.Tcu嘉泰姆

八,相关产品                 更多同类产品......Tcu嘉泰姆

Tcu嘉泰姆