CXLD64373 Low-Dropout Regulators high-current, high-accuracy, lowdropout voltage regulators. Using the process with a PNP pass element

产品概述

返回TOP

The CXLD64373(-XX) are high-current, high-accuracy, lowdropout voltage regulators. Using the process with a PNP pass element, these regulators feature 350mV (full load) dropout voltages and very low ground current. These devices also find applications in lower current, low-dropout critical systems, where their tiny dropout voltage and ground current values are important attributes. The CXLD64373(-XX) are fully protected against overcurrent faults, reversed input polarity, reversed lead insertion, over temperature operation, positive and negative transient voltage spikes. Five-pin fixed voltage versions feature a logic level ON/OFF control and an error flag, which signals whenever the output falls out of regulation. On the CXLD64373(-XX) and CXLD64374, the EN (Enable) pin may be tied to VIN, if it is not required for the ON/OFF control. The CXLD64373(-XX) are available in 3- and 5-pin TO-220, TO- 263 and TO-252 packages. The Output Voltage, (-XX), may be 1.5V, 1.8V, 2.5V, 2.85V, 3V, 3.3V, 5V, 8V, 9V, 12V.

   产品特点 返回TOP

• High-current capability.........................1.5A
• Low dropout voltage ...........................350mV
• Low ground current
• 1% initial accuracy
• Extremely fast transient response
• Reverse-battery and “load dump” protection
• Zero-current shutdown mode (5-pin versions)
• Error flag signals Output Out-of-Regulation (5-Pin versions)
• Fixed voltage and adjustable versions

   应用范围 返回TOP

• Battery-powered equipment
• High-efficiency “green” computer systems
• Automotive electronics
• High-efficiency linear power supplies
• High-efficiency post-regulator for switching supply

   技术规格书（产品PDF) 返回TOP 

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！

   产品封装图 返回TOP

      
   电路原理图 返回TOP

  相关芯片选择指南 返回TOP                   更多同类产品......