CMOS双LDO稳压器CXLD64216超小型300mA突入电流防止功能1%输出电压精度高纹波抑制率高漏失电压低

CXLD64216系列是一款超小型CMOS双LDO稳压器，具有300毫安的输出电流能力。该系列具有1%输出电压精度高、纹波抑制率高、漏失电压低的特点，采用超小型、高散热的LGA-6A01（1.2mm×1.2mm×h0.4mm）系列。该系列适用于高密度板的安装，通过控制EN-pin，每个调节器都可以独立关闭，处于待机状态。在这种状态下，输出电容器（CL）的电荷通过内部自动放电开关放电，结果输出电压迅速恢复到VSS水平。输出稳定电容器（CL）也与低ESR陶瓷电容器兼容。即使在频繁负载下，也能保持高水平的输出稳定波动，由于具有优异的瞬态响应性能。过电流保护电路和过热保护电路集成，当输出电流达到电流极限或结温达到温度极限时，这些电路开始工作。两个调节器完全隔离，以使负载波动期间的串扰最小化

目录

1.产品概述       2.产品特点     

3.应用范围       4.技术规格书下载（PDF文档）

5.产品封装       6.电路原理图  

7.相关产品

   产品概述 返回TOP

---

    The CXLD64216 series is an ultra small CMOS dual LDO regulator, with 300mA output current capability. The series features high accuracy of 1% output voltages, high ripple rejection and low dropout voltage.The series is available in LGA-6A01 (1.2mm × 1.2mm × h0.4mm) which features ultra small and high heat dissipation. The series is suited for high density board installation.Each regulator can be turned off independently to be in stand-by mode by controlling EN pin. In this state, the electric charge at the output capacitor (CL) is discharged via the internal auto-discharge switch, and as a result the VOUT voltage quickly returns to the VSS level.The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors.The high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance.Over current protection circuit and over heat protection circuit are integrated, these circuits start working when output current reaches current limit or junction temperature reaches temperature limit.The two regulators are completely isolated so that a cross talk during load fluctuations is minimized.

   产品特点 返回TOP

---

   

   应用范围 返回TOP

---

● Smart phones / Mobile phones 

● Wireless LAN 

● Mobile devices / terminals 

● Modules ( wireless, cameras, etc. )

   技术规格书（产品PDF) 返回TOP 

---

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！

 

产品封装图 返回TOP

---

电路原理图 返回TOP

 

---

 

相关芯片选择指南 返回TOP                    更多同类产品......

---

 

双路输出电压调整器
产品名称	特点	封装	VIN MIN V	VIN MAX  V	VOUT MIN V	VOUT MAX  (V)	IOUT mA	精度(%)	输入输 出电压差 (mV)	消耗 电流 μA	PSR RdB	温度范围(℃)
CXLD64208	Dual LDO	sot-26w usp-6b usp-6c	1.5	6	0.8	5	150	±2.0	100	25	70	-40～＋85
CXLD64209	低消耗电流 Dual	sot-25	1.5	6	0.9	5	200	±2.0	320	0.8		-40～＋85
CXLD64210	低消耗电流 Dual	sot-26	1.5	6	0.9	5	200	±2.0	320	0.8		-40～＋85
CXLD64211	高速、双通道	sot-26 usp-6c uspn-6	1.5	6	0.8	5	200	±1.0	95	28	65	-40～＋85
CXLD64212	双路输出	sot-26 usp-6c	1.5	6	0.8	4	200	±1.0	95	10	60	-40～＋85
CXLD64213	带ON/OFF功 能双通道输出	sot-26 usp-6c	1.5	6	0.8	5	300	±2.0		23	60	-40～＋85
CXLD64214	150mA小型高速Dual	sot26 usp6b04 uspn-6	1.6	5.5	1.2	3.6	150	±1.5	130	55	75	-40～＋85
CXLD64215	带防止突入电流,300mA	usp-6c	1.6	5.5	1.2	3.6	300	±1.0	70	90	75	-40～＋85
CXLD64216	小型300mA,突 入电流防止功能	lga-6a01	1.6	5.5	1.2	3.6	300	±1.0	64	90	75	-40～＋85