产品信息查询
产品 技术 新闻 资料
首页 > 产品中心 > 音频放大IC > D类音频功放电路 >CXAD4159消除输出削波的自动电平控制高效无滤波器的D类音频 带自动高度控制ALC功率放大器在10%THD+D的情况下将3.2W输出到4Ω负载或将1.8W输出到8Ω负载音频输出信号具有ALC功能
CXAD4159消除输出削波的自动电平控制高效无滤波器的D类音频 带自动高度控制ALC功率放大器在10%THD+D的情况下将3.2W输出到4Ω负载或将1.8W输出到8Ω负载音频输出信号具有ALC功能
11

CXAD4159是一种高效、无滤波器的D类音频
带自动高度控制(ALC)的功率放大器。它在运作
从2.7V到5.5V电源。当使用5V电源电压供电时,CXAD4159能够在10%THD+D的情况下将3.2W输出到4Ω负载或将1.8W输出到8Ω负载。CXAD4159的音频输出信号具有ALC功能,它检测由超电平输入信号引起的输出限幅,并自动调整
在保持
音频输出信号的最大允许动态范围。ALC还消除了由于低电池供电电压导致的输出削波。作为一个D类功率放大器,ft2045具有高效率(高达88%)和高PSRR(217Hz时为70dB),这使得该设备非常适合用于电池供电的便携式设备。它还具有在打开和关闭变换期间最小化单击和弹出噪声的功能。
无过滤器D类操作
消除输出削波的自动电平控制
效率高达90%
5V电源下的最大输出功率(ALC关闭)
3.2W(4Ω负载,10%THD+N)
1.8W(8Ω负载,10%THD+N)
5V电源下的恒定输出功率(自动高度控制开启)
2.4W(4Ω负载,THD+N<0.6%)
1.35W(8Ω负载,THD+N<0.5%)
3.6V电源下的恒定输出功率(自动高度控制开启)
1.2W(4Ω负载,THD+N<0.6%)
0.7W(8Ω负载,THD+N<0.5%)
低THD+N<0.05%(VDD=3.6V,f=1kHz,RL=8Ω,PO=0.5W)
低静态电流:2.2mA@VDD=3.6V
低关断电流<0.1μA
高PSRR:75dB@217Hz
短路和热过载保护
快速启动时间:4ms

CXAD4159消除输出削波的自动电平控制高效无滤波器的D类音频 带自动高度控制ALC功率放大器在10%THD+D的情况下将3.2W输出到4Ω负载或将1.8W输出到8Ω负载音频输出信号具有ALC功能
产品手册
样品申请

样品申请

产品简介

目录PMF嘉泰姆

1.产品概述                       2.产品特点PMF嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 PMF嘉泰姆
5.产品封装图                     6.电路原理图                   PMF嘉泰姆
7.功能概述                        8.相关产品
PMF嘉泰姆

一,产品概述(General Description)         PMF嘉泰姆


   The CXAD4159 is a high-efficiency, filterless Class-D audio power amplifier with automatic level control (ALC). It operates from 2.7V to 5.5V supply.When powered with 5V supply voltage, the CXAD4159 is capable of delivering 3.2W into 4Ω load or 1.8W into 8Ω load with 10% THD+D.The CXAD4159 features ALC on the audio output signals, which detects the output clipping caused by the over-level input signal and utomatically adjusts the voltage gain of the amplifier to eliminate the clipping while maintaining the maximally-allowed dynamic range of the audio output signals. The ALC also eliminates the output clipping due to low battery supply voltage.As a Class-D power amplifier, the ft2045 features high efficiency (up to 88%) and high PSRR (70dB at 217Hz), which make the device ideal for use in battery-powered portable devices. It also features minimized click-and-pop noise during turn-on and turn-off transitions.PMF嘉泰姆
二.产品特点(Features)PMF嘉泰姆
Filterless Class-D operationPMF嘉泰姆
Automatic level control to eliminate output clippingPMF嘉泰姆
High efficiency up to 90%PMF嘉泰姆
Maximum output power at 5V supply (ALC Off)PMF嘉泰姆
             3.2W (4Ω load, 10% THD+N)PMF嘉泰姆
             1.8W (8Ω load, 10% THD+N)PMF嘉泰姆
Constant output power at 5V supply (ALC On)PMF嘉泰姆
            2.4W (4Ω load, THD+N < 0.6%)PMF嘉泰姆
            1.35W (8Ω load, THD+N < 0.5%)PMF嘉泰姆
Constant output power at 3.6V supply (ALC On)PMF嘉泰姆
            1.2W (4Ω load, THD+N < 0.6%)PMF嘉泰姆
             0.7W (8Ω load, THD+N < 0.5%)PMF嘉泰姆
Low THD+N < 0.05% (VDD=3.6V, f=1kHz, RL=8Ω, PO=0.5W)PMF嘉泰姆
Low quiescent current: 2.2mA @ VDD=3.6VPMF嘉泰姆
Low shutdown current < 0.1μAPMF嘉泰姆
High PSRR: 75dB @ 217HzPMF嘉泰姆
Short-circuit & thermal overload protectionPMF嘉泰姆
Fast startup time: 4msPMF嘉泰姆
Available in MSOP-8L packagePMF嘉泰姆
三,应用范围 (Applications)PMF嘉泰姆
Cellular handsetsPMF嘉泰姆
Portable navigation devicesPMF嘉泰姆
Multimedia internet devicesPMF嘉泰姆
四.下载产品资料PDF文档
PMF嘉泰姆


需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!PMF嘉泰姆

 QQ截图20160419174301.jpgPMF嘉泰姆

五,产品封装图 (Package)PMF嘉泰姆


image.pngPMF嘉泰姆

SYMBOLPMF嘉泰姆

MSOP-8LPMF嘉泰姆

DESCRIPTIONPMF嘉泰姆

 VREFPMF嘉泰姆

   2PMF嘉泰姆

Analog reference at VDD/2, the common-mode bias for audio inputs.PMF嘉泰姆

 INPPMF嘉泰姆

   3PMF嘉泰姆

Positive audio input terminal.PMF嘉泰姆

 INNPMF嘉泰姆

   4PMF嘉泰姆

Negative audio input terminal.PMF嘉泰姆

 VONPMF嘉泰姆

   5PMF嘉泰姆

Negative BTL audio output terminal.PMF嘉泰姆

 VDDPMF嘉泰姆

   6PMF嘉泰姆

Power supply.PMF嘉泰姆

 GNDPMF嘉泰姆

   7PMF嘉泰姆

Power ground.PMF嘉泰姆

 VOPPMF嘉泰姆

   8PMF嘉泰姆

Positive BTL audio output terminal.PMF嘉泰姆

六.电路原理图PMF嘉泰姆


PMF嘉泰姆
blob.pngblob.pngPMF嘉泰姆

七,功能概述PMF嘉泰姆


APPLICATIONS INFORMATIONPMF嘉泰姆

   The CXAD4159 is a high-efficiency, filterless Class-D audio power amplifier with automatic level control (ALC). It operates from 2.7V to 5.5V supply. When powered with 5V supply voltage, the CXAD4159 is capable of delivering 3.2W into 4Ω load or 1.8W into 8Ω load, with 10% THD+N. When operated in ALC mode with 5V supply voltage, the JTCXAD4159s capable of delivering 2.4W into 4Ω load or 1.35W into 8Ω load, with THD+D less than 0.5%. PMF嘉泰姆

   The JTM145CXAD4159res ALC on the audio output signals, which detects the output clipping caused by the over-level input signal and automatically adjusts the voltage gain of the amplifier to eliminate the clipping while maintaining the maximally-allowed dynamic range of the audio output signals. The ALC also eliminates the output clipping due to low battery supply voltage. In addition, the JTM145 featureCXAD4159lterless PWM modulator that eliminates the need for an external LC filter, therefore reducing the number of external components, the PCB board space, and the system cost.In this manner, the power efficiency is also improved. PMF嘉泰姆
As specifically designed for portable applications, the CXAD4159 incorporates CXAD4159 down mode to minimize the power consumption by holding the CTRL pin to ground. It also includes comprehensive protection features against various operating faults such as over-current, short-circuit, over-temperature, or under-voltage for a safe and reliable operation. 
PMF嘉泰姆

AUTOMATIC LEVEL CONTROL (ALC)      PMF嘉泰姆

   The automatic level control is to maintain the audio output signals for a maximum voltage swing without distortion when an excessive input that may cause output clipping is applied. With the ALC function, theCXAD4159 lowers the voltage gain of the amplifier to an appropriate value such that the clipping at the outputs is eliminated. It also eliminates the clipping of the output signal due to the reduction of the power-supply voltage.PMF嘉泰姆

八,相关产品    更多同类产品.......PMF嘉泰姆


D类音频放大IC
 型号  电压范围  静态电流 输出功率  静态输出电压 纹波抑制比  封装
CXAD4173 2.4V-5.5V 3.8mA 3.0W/Vcc=5V Rl=4ohm 1mV/Vcc=5V 75dB MSOP-8 SOP-8
CXAD4158 2.5V-6.5V 4mA 4.7W/Vcc=6.5V Rl=4ohm 6mV/Vcc=5V 70dB SOP8
CXAD4159 2.7V-5.5V 0.1uA 3.2W/Vcc=5VRl=4ohm 10mV/Vcc=5V 75dB MSOP8
CXAD4160 2V-5.5V   5W/Vcc=5V Rl=2ohm     ESOP8
CXAD4161 2.0V-5.5V 16mA 2*3.2W/Vcc=5V Rl=4ohm 5mV/Vcc=6V 58dB SOP16
CXAD4162 2.8V-5.0V 8mA 2*5.2W/Vcc=5V Rl=2ohm 10mV/Vcc=6V 80dB ESOP16
CXAD4163 3.0V-9.0V 21mA 2*9.5W/Vcc=8.5V Rl=4ohm 6.5mV/Vcc=6V 91dB ESOP16
CXAD4164 2.5V-6.5V 6.5mA 2*4.7W/Vcc=6.5V Rl=4ohm 6mV/Vcc=6V 91dB SOP16
带升压的D类音频放大IC
 型号 电压范围   静态电流  输出功率  静态输出电压  纹波抑制比  封装
CXAD4165 2.5V-5.5V 8mA 7W/Vcc=4.2V,Rl=3ohm   90dB SOP16-PP

 PMF嘉泰姆

发表评论
    共有条评论
    用户名: 密码:
    验证码: 匿名发表

热门信息
  • 最新信息
    推荐信息
    相关文章
  • CXLB74214集成升压转换器锂电池充电管理电池电量指示
  • CXLB74215同步升压系统提供超过300mA输出电流转换效率
  • CXLB74216开关充电技术提供1.1A充电效率高至92%内置IC
  • CXLB74218集成开关充电和同步升压功能的单芯片解决方
  • CXLB74206同步开关充电管理模块同步整流升压放电管理
  • CXLB74205同步开关充电管理模块同步整流升压放电管理
  • CXLB74204 移动电源专用4合1单片系统3A充电3A放电移动
  • CXLB74200 2A同步开关充电/2.4A同步开关放电移动电源
  • CXLB74199 3A同步开关充电3A同步升压放电移动电源管理
  • CXLB74198 3A同步开关充电3A同步升压放电充电放电3-5
  • 推荐资讯
    CXRT2122微波感应解决方案
    CXRT2122微波感应解决
    电池管理系统(BMS)深度解析:工作原理、关键技术与应用电路设计
    电池管理系统(BMS)深
    移动储能电源深度解析:工作原理、技术特点与典型应用电路
    移动储能电源深度解析
    光伏逆变器深度解析:工作原理、类型特点与典型应用电路
    光伏逆变器深度解析:工
    LC谐振DAB拓扑深度解析:工作原理、技术特点与典型应用电路
    LC谐振DAB拓扑深度解
    工业级运放深度解析:工作原理、类型特点与典型应用电路
    工业级运放深度解析:工
    信号分配电路深度解析:工作原理、类型特点与典型应用电路
    信号分配电路深度解析
    电压比较器深度解析:工作原理、类型特点与典型应用电路
    电压比较器深度解析:工
    有源滤波器设计深度解析:原理、类型、参数计算与典型应用电路
    有源滤波器设计深度解
    单电源运算放大器深度解析:工作原理、典型应用与设计要点
    单电源运算放大器深度
    宽电压运算放大器深度解析:技术特点、典型应用与设计选型
    宽电压运算放大器深度
    四路运算放大器深度解析:技术特点、典型应用与设计选型
    四路运算放大器深度解