产品信息查询
产品 技术 新闻 资料
首页 > 产品中心 > 电源管理 > 同异步升降压DC转换器 > 同步DC-DC升压IC >1MHz开关频率CXSU63035紧凑高效同步升压转换器与功率mosfet集成用于单电池锂离子/聚合物电池内部软启动
1MHz开关频率CXSU63035紧凑高效同步升压转换器与功率mosfet集成用于单电池锂离子/聚合物电池内部软启动
9

CXSU63035是一款紧凑、高效、同步升压转换器,集成了用于单电池锂离子/聚合物电池的功率mosfet。这个转换器无开关时仅消耗100uA静态电流。当电流负载较轻时,该变换器进入突发模式以获得高效率。当电流负载为足够重,它进入固定频率的脉宽调制模式

1MHz开关频率CXSU63035紧凑高效同步升压转换器与功率mosfet集成用于单电池锂离子/聚合物电池内部软启动
产品手册
样品申请

样品申请

产品简介

目录8gM嘉泰姆

1.产品概述                       2.产品特点8gM嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 8gM嘉泰姆
5.产品封装图                     6.电路原理图                   8gM嘉泰姆
7.功能概述                        8.相关产品8gM嘉泰姆

 8gM嘉泰姆

一,产品概述(General Description)         8gM嘉泰姆
         The CXSU63035 is a compact, high-efficiency, synchronous step-up converter with power MOSFETintegrated for a single-cell Li-ion/polymer battery. This converter8gM嘉泰姆
consumes only 100uA quiescent current when no switching. When current load is light, this converter enters burst mode to obtain high efficiency. When current load is8gM嘉泰姆
heavy enough, it enters fixed-frequency PWM mode. It adopts peak current mode for fast transient response with internal compensation. This converter contains  cycle-by-cycle current limiting and short protection circuit. It is suitable for iPad-like computers, smart phones and portable handheld devices. The device is packed in ESOP8 package.8gM嘉泰姆
二.产品特点(Features)8gM嘉泰姆
·Wide input range: 2.6-5V input, 2.0A @5V Vout8gM嘉泰姆
· 1MHz switching frequency8gM嘉泰姆
· Low RDS(ON): 110mΩ@5V NMOS and 150mΩ@5V PMOS8gM嘉泰姆
· Up to 93% efficiency8gM嘉泰姆
· Accurate Reference: 0.6V Reference8gM嘉泰姆
· Under-Voltage lockout Protection8gM嘉泰姆
  Over-Temperature Protection Short Protection8gM嘉泰姆
· Internal Soft Start8gM嘉泰姆
· 1uA Shutdown current8gM嘉泰姆
· RoHS Compliant and Halogen Free8gM嘉泰姆
· Compact package: ESOP88gM嘉泰姆
三,应用范围 (Applications)8gM嘉泰姆
IPad- like tablet computers8gM嘉泰姆
Smart phones8gM嘉泰姆
Other portable devices8gM嘉泰姆
四.下载产品资料PDF文档 8gM嘉泰姆


需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持8gM嘉泰姆

 QQ截图20160419174301.jpg8gM嘉泰姆

五,产品封装图 (Package)8gM嘉泰姆
8gM嘉泰姆

引脚8gM嘉泰姆

名字8gM嘉泰姆

功能8gM嘉泰姆

18gM嘉泰姆

RO8gM嘉泰姆

接收输出端: A 端电压比 B 端高 0V 时 RO 为高,A 端电压比 B 端低 300mV8gM嘉泰姆
时 RO 为低8gM嘉泰姆

28gM嘉泰姆

RE8gM嘉泰姆

接收使能端:低电平有效,RE 为高时,接收输出为高阻8gM嘉泰姆

38gM嘉泰姆

DE8gM嘉泰姆

发送使能端:高电平有效,DE 为低时,发送输出为高阻。 DE 为高电平时8gM嘉泰姆
芯片工作在发送状态,DE 为低电平且 RE 为低电平时芯片工作在接收状态。8gM嘉泰姆

48gM嘉泰姆

DI8gM嘉泰姆

发送数据输入端: DI 为低时,A 输出高电平 B 输出低电平,DI 为高时正好8gM嘉泰姆
相反。8gM嘉泰姆

58gM嘉泰姆

GND8gM嘉泰姆

地,电源负端8gM嘉泰姆

68gM嘉泰姆

A8gM嘉泰姆

正向接收输入端也即正向发送输出端8gM嘉泰姆

78gM嘉泰姆

B8gM嘉泰姆

反向接收输入端也即反向发送输出端8gM嘉泰姆

88gM嘉泰姆

VCC8gM嘉泰姆

电源正端8gM嘉泰姆

六.电路原理图8gM嘉泰姆
8gM嘉泰姆
8gM嘉泰姆
七,功能概述8gM嘉泰姆


UnderVoltage Lockout8gM嘉泰姆

An under voltage lockout function prevents device start-up if the supply voltage on VBAT is lower than8gM嘉泰姆
approximately 2.8V. When in operation and the battery is being discharged, the device automatically enters the8gM嘉泰姆
shutdown mode if the voltage on VBAT drops below approximately 2.5V. This under voltage lockout function is8gM嘉泰姆
implemented in order to prevent the malfunctioning of the converter. 8gM嘉泰姆
SoftStart8gM嘉泰姆
When the device enables the internal start-up cycle, it starts with the first step, the precharge phase. During8gM嘉泰姆
precharge, the rectifying switch is turned on until the output capacitor is charged to a value close to the input8gM嘉泰姆
voltage. The rectifying switch current is limited in that phase. This also limits the output current under8gM嘉泰姆
short-circuit conditions at the output. After charging the output capacitor to the input voltage the device starts8gM嘉泰姆
switching.8gM嘉泰姆

Application Information8gM嘉泰姆

Because of the high integration in the CXSU63035, the application circuit based on this regulator IC is rather8gM嘉泰姆
simple. Only input capacitor CIN, output capacitor COUT, inductor L and feedback resistors (R1 and R2) need to8gM嘉泰姆
be selected for the targeted applications specifications.8gM嘉泰姆
Feedback resistor dividers R1 and R2:8gM嘉泰姆
Choose R1 and R2 to program the proper output voltage. To minimize the power consumption under light loads,8gM嘉泰姆
it is desirable to choose large resistance values for both R1 and R 2. A value of between 10k and 1M is8gM嘉泰姆
recommended for both resistors. If R1=200k is chosen, then R2 can be calculated to be:8gM嘉泰姆
R2 = (R1×0.6V)/(VOUT - 0.6V)8gM嘉泰姆
Input capacitor CIN:8gM嘉泰姆
To minimize the potential noise problem, place a typical X5R or better grade ceramic capacitor really close to8gM嘉泰姆
the IN and GND pins. Care should be taken to minimize the loop area formed by CIN, and IN/GND pins. In this8gM嘉泰姆
case a 10uF low ESR ceramic is recommended.8gM嘉泰姆
Output capacitor COUT:8gM嘉泰姆
The output capacitor is selected to handle the output ripple noise requirements. Both steady state ripple and8gM嘉泰姆
transient requirements must be taken into consideration when selecting this capacitor. For the best performance,8gM嘉泰姆
it is recommended to use X5R or better grade ceramic capacitor with 10V rating and more than two pcs 22uF8gM嘉泰姆
Capacitor.8gM嘉泰姆
八,相关产品                更多同类产品........    8gM嘉泰姆


内置MOS同步DC-DC升压IC8gM嘉泰姆

型号8gM嘉泰姆

工作模式8gM嘉泰姆

电压范围8gM嘉泰姆

输出电压8gM嘉泰姆

输出电压形式8gM嘉泰姆

输出电压精度8gM嘉泰姆

输出电流限制8gM嘉泰姆

效率8gM嘉泰姆

静态电流8gM嘉泰姆

工作频率8gM嘉泰姆

封装8gM嘉泰姆

CXSU630338gM嘉泰姆

PWM8gM嘉泰姆

0.9V-5.0V8gM嘉泰姆

最大5.5V8gM嘉泰姆

可调输出8gM嘉泰姆

+/-2%8gM嘉泰姆

950mA8gM嘉泰姆

90%8gM嘉泰姆

0.1uA8gM嘉泰姆

1.4MHz8gM嘉泰姆

SOT-268gM嘉泰姆

CXSU63033A8gM嘉泰姆

PWM8gM嘉泰姆

0.85V-5.0V8gM嘉泰姆

最大5.0V8gM嘉泰姆

可调输出8gM嘉泰姆

+/-2%8gM嘉泰姆

2A8gM嘉泰姆

93%8gM嘉泰姆

0.1uA8gM嘉泰姆

1.5MHz8gM嘉泰姆

SOT23-68gM嘉泰姆

CXSU630348gM嘉泰姆

PWM8gM嘉泰姆

0.85V-5.5V8gM嘉泰姆

2.5V-5.5V8gM嘉泰姆

可调输出/真关断8gM嘉泰姆

+/-2%8gM嘉泰姆

1.2A8gM嘉泰姆

94%8gM嘉泰姆

300uA8gM嘉泰姆

1.2MHz8gM嘉泰姆

SOT23-68gM嘉泰姆

CXSU630358gM嘉泰姆

PWM8gM嘉泰姆

2.5V-4.5V8gM嘉泰姆

最大6V8gM嘉泰姆

可调输出8gM嘉泰姆

+/-2%8gM嘉泰姆

3.3A8gM嘉泰姆

93%8gM嘉泰姆

100uA8gM嘉泰姆

1MHz8gM嘉泰姆

ESOP-88gM嘉泰姆

CXSU630368gM嘉泰姆

PWM8gM嘉泰姆

2.4V-6.0V8gM嘉泰姆

2.5V-5.3V8gM嘉泰姆

可调输出/真关断8gM嘉泰姆

+/-2%8gM嘉泰姆

6A8gM嘉泰姆

91%8gM嘉泰姆

180uA8gM嘉泰姆

500KHz8gM嘉泰姆

ESOP-88gM嘉泰姆

CXSU630378gM嘉泰姆

PWM8gM嘉泰姆

2.5V-5.25V8gM嘉泰姆

2.5V-5.5V8gM嘉泰姆

可调输出8gM嘉泰姆

+/-2%8gM嘉泰姆

8A8gM嘉泰姆

90%8gM嘉泰姆

45uA8gM嘉泰姆

500KHz8gM嘉泰姆

ESOP-88gM嘉泰姆

CXSU63038B8gM嘉泰姆

PWM8gM嘉泰姆

2.8V-5.0V8gM嘉泰姆

最大5.5V8gM嘉泰姆

可调输出8gM嘉泰姆

+/-2%8gM嘉泰姆

4A8gM嘉泰姆

91%8gM嘉泰姆

180uA8gM嘉泰姆

550KHz8gM嘉泰姆

ESOP-88gM嘉泰姆

CXSU63038A8gM嘉泰姆

PWM8gM嘉泰姆

2.5V-6.0V8gM嘉泰姆

最大5.5V8gM嘉泰姆

可调输出/真关断8gM嘉泰姆

+/-2%8gM嘉泰姆

6A8gM嘉泰姆

90%8gM嘉泰姆

0.5uA8gM嘉泰姆

1.2MHz8gM嘉泰姆

SOP8-PP8gM嘉泰姆

CXSU630398gM嘉泰姆

PWM8gM嘉泰姆

2.5V-5.5V8gM嘉泰姆

最大5.5V8gM嘉泰姆

可调输出/真关断8gM嘉泰姆

+/-2%8gM嘉泰姆

6A8gM嘉泰姆

90%8gM嘉泰姆

0.5uA8gM嘉泰姆

1.2MHz8gM嘉泰姆

QFN4X4-16L8gM嘉泰姆

CXSU630408gM嘉泰姆

PWM8gM嘉泰姆

1.8V-6.0V8gM嘉泰姆

最大5.5V8gM嘉泰姆

可调输出/真关断8gM嘉泰姆

+/-2%8gM嘉泰姆

6A8gM嘉泰姆

90%8gM嘉泰姆

0.5uA8gM嘉泰姆

1.2MHz8gM嘉泰姆

SOP8-PP8gM嘉泰姆

CXSU63041B8gM嘉泰姆

PWM8gM嘉泰姆

1.8V-5.25V8gM嘉泰姆

2.5V-5.5V8gM嘉泰姆

可调输出8gM嘉泰姆

+/-2%8gM嘉泰姆

5A8gM嘉泰姆

97%8gM嘉泰姆

10uA8gM嘉泰姆

500KHz8gM嘉泰姆

QFN2X2-108gM嘉泰姆

8gM嘉泰姆

发表评论
    共有条评论
    用户名: 密码:
    验证码: 匿名发表

热门信息
  • 最新信息
    推荐信息
    相关文章
  • 外部输入参考电压升压型DC/DC控制器CXSU63151轻负载到
  • CXLE8692基准源振荡电路误差放大器相位补偿电路PWM/PF
  • CXLE8692基准源振荡电路误差放大器相位补偿电路PWM/PF
  • CXLE86201固定频率恒定电流升压DC/DC控制器用于手机PD
  • CXLE86201固定频率恒定电流升压DC/DC控制器用于手机PD
  • CXLE86201固定频率恒定电流升压DC/DC控制器用于手机PD
  • CXLE86200固定频率恒定电流的升压DC/DC控制器用于高清
  • CXLE86200固定频率恒定电流的升压DC/DC控制器用于高清
  • CXLE86200固定频率恒定电流的升压DC/DC控制器用于高清
  • CXLE8684 CXLE8685固定频率恒定电流升压DC/DC控制器用
  • 推荐资讯
    CXRT2122微波感应解决方案
    CXRT2122微波感应解决
    电池管理系统(BMS)深度解析:工作原理、关键技术与应用电路设计
    电池管理系统(BMS)深
    移动储能电源深度解析:工作原理、技术特点与典型应用电路
    移动储能电源深度解析
    光伏逆变器深度解析:工作原理、类型特点与典型应用电路
    光伏逆变器深度解析:工
    LC谐振DAB拓扑深度解析:工作原理、技术特点与典型应用电路
    LC谐振DAB拓扑深度解
    工业级运放深度解析:工作原理、类型特点与典型应用电路
    工业级运放深度解析:工
    信号分配电路深度解析:工作原理、类型特点与典型应用电路
    信号分配电路深度解析
    电压比较器深度解析:工作原理、类型特点与典型应用电路
    电压比较器深度解析:工
    有源滤波器设计深度解析:原理、类型、参数计算与典型应用电路
    有源滤波器设计深度解
    单电源运算放大器深度解析:工作原理、典型应用与设计要点
    单电源运算放大器深度
    宽电压运算放大器深度解析:技术特点、典型应用与设计选型
    宽电压运算放大器深度
    四路运算放大器深度解析:技术特点、典型应用与设计选型
    四路运算放大器深度解