• [ 产品资料下载 ]

样品申请

目录jAG嘉泰姆

1.产品概述                       2.产品特点jAG嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 jAG嘉泰姆
5.产品封装图                     6.电路原理图                   jAG嘉泰姆
7.功能概述                        8.相关产品jAG嘉泰姆

 jAG嘉泰姆

一,产品概述(General Description)         jAG嘉泰姆
         The CXSU63035 is a compact, high-efficiency, synchronous step-up converter with power MOSFETs integrated for a single-cell Li-ion/polymer battery. This converterjAG嘉泰姆
consumes only 100uA quiescent current when no switching. When current load is light, this converter enters burst mode to obtain high efficiency. When current load isjAG嘉泰姆
heavy enough, it enters fixed-frequency PWM mode. It adopts peak current mode for fast transient response with internal compensation. This converter contains  cycle-by-cycle current limiting and short protection circuit. It is suitable for iPad-like computers, smart phones and portable handheld devices. The device is packed in ESOP8 package.jAG嘉泰姆
二.产品特点(Features)jAG嘉泰姆
·Wide input range: 2.6-5V input, 2.0A @5V VoutjAG嘉泰姆
· 1MHz switching frequencyjAG嘉泰姆
· Low RDS(ON): 110mΩ@5V NMOS and 150mΩ@5V PMOSjAG嘉泰姆
· Up to 93% efficiencyjAG嘉泰姆
· Accurate Reference: 0.6V ReferencejAG嘉泰姆
· Under-Voltage lockout ProtectionjAG嘉泰姆
  Over-Temperature Protection Short ProtectionjAG嘉泰姆
· Internal Soft StartjAG嘉泰姆
· 1uA Shutdown currentjAG嘉泰姆
· RoHS Compliant and Halogen FreejAG嘉泰姆
· Compact package: ESOP8jAG嘉泰姆
三,应用范围 (Applications)jAG嘉泰姆
IPad- like tablet computersjAG嘉泰姆
Smart phonesjAG嘉泰姆
Other portable devicesjAG嘉泰姆
四.下载产品资料PDF文档 jAG嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！jAG嘉泰姆

 jAG嘉泰姆

五,产品封装图 (Package)jAG嘉泰姆
jAG嘉泰姆

六.电路原理图jAG嘉泰姆
jAG嘉泰姆
jAG嘉泰姆
七,功能概述jAG嘉泰姆

UnderVoltage LockoutjAG嘉泰姆

An under voltage lockout function prevents device start-up if the supply voltage on VBAT is lower thanjAG嘉泰姆
approximately 2.8V. When in operation and the battery is being discharged, the device automatically enters thejAG嘉泰姆
shutdown mode if the voltage on VBAT drops below approximately 2.5V. This under voltage lockout function isjAG嘉泰姆
implemented in order to prevent the malfunctioning of the converter. jAG嘉泰姆
SoftStartjAG嘉泰姆
When the device enables the internal start-up cycle, it starts with the first step, the precharge phase. DuringjAG嘉泰姆
precharge, the rectifying switch is turned on until the output capacitor is charged to a value close to the inputjAG嘉泰姆
voltage. The rectifying switch current is limited in that phase. This also limits the output current underjAG嘉泰姆
short-circuit conditions at the output. After charging the output capacitor to the input voltage the device startsjAG嘉泰姆
switching.jAG嘉泰姆

Application InformationjAG嘉泰姆

Because of the high integration in the CXSU63035, the application circuit based on this regulator IC is ratherjAG嘉泰姆
simple. Only input capacitor CIN, output capacitor COUT, inductor L and feedback resistors (R1 and R2) need tojAG嘉泰姆
be selected for the targeted applications specifications.jAG嘉泰姆
Feedback resistor dividers R1 and R2:jAG嘉泰姆
Choose R1 and R2 to program the proper output voltage. To minimize the power consumption under light loads,jAG嘉泰姆
it is desirable to choose large resistance values for both R1 and R 2. A value of between 10k and 1M isjAG嘉泰姆
recommended for both resistors. If R1=200k is chosen, then R2 can be calculated to be:jAG嘉泰姆
R2 = (R1×0.6V)/(VOUT - 0.6V)jAG嘉泰姆
Input capacitor CIN:jAG嘉泰姆
To minimize the potential noise problem, place a typical X5R or better grade ceramic capacitor really close tojAG嘉泰姆
the IN and GND pins. Care should be taken to minimize the loop area formed by CIN, and IN/GND pins. In thisjAG嘉泰姆
case a 10uF low ESR ceramic is recommended.jAG嘉泰姆
Output capacitor COUT:jAG嘉泰姆
The output capacitor is selected to handle the output ripple noise requirements. Both steady state ripple andjAG嘉泰姆
transient requirements must be taken into consideration when selecting this capacitor. For the best performance,jAG嘉泰姆
it is recommended to use X5R or better grade ceramic capacitor with 10V rating and more than two pcs 22uFjAG嘉泰姆
Capacitor.jAG嘉泰姆
八,相关产品                更多同类产品........    jAG嘉泰姆

jAG嘉泰姆

◀ 上一篇:0.85V到5V的输入电压CXSU63034高效的固定频率同步DC/DC转换器自动PFM模式电磁干扰抑制反环控制电路

返回顶部

下一篇▶: 6A高效同步脉冲宽度调制升压变换器CXSU63036电流模式升压DC-DC变换器脉冲宽度调制控制

共有条评论 用户名: 密码: 验证码: 匿名发表